• Converts DMX Signal to 0-10V Dimming Signal
  • Complies with both DMX RDM and traditional
    DMX networks
  • Use Driver Dim-to-Off Capability to Eliminate
    AC Switch or Relay
  • Powered by 12Vdc with Simple 3-Wire
    Connection to Driver
  • Low Standby Power < 0.5W
  • At Power on the 0-10V Output Remains at 0V
    until DMX Signal is Received
  • In the Event of DMX Signal Loss, the 0-10V
    Output Will Not Change
  • Waterproof (IP67) and UL Dry/Damp/Wet
  • Suitable for Built-in Use

The CNV-DMXR is a DMX RDM to 0-10V converter that enables one or more Inventronics Controls-Ready drivers to be controlled by a DMX system. The CNV-DMXR is compatible with LED drivers with dim-to-off capability, 12V/200mA auxiliary power supply and 0-10V dimming input.
The CNV-DMXR is DMX RDM compatible. DMX RDM (Remote Device Management) permits intelligent bi-directional communication between devices from multiple manufacturers utilizing a modified DMX512 data link. This allows the DMX RDM compatible device to be addressed and configured remotely, using a compatible DMX RDM master.  DMX RDM devices are inherently compatible with standard DMX networks.

©2012 INVENTRONICS(HANGZHOU), INC.All Rights Reserved.Zhe ICP bei09057367NOMountor1    Send Messages    Contact Us    You are the 28739th visitors